3m Espe Vps Tray Adhesive

• Economic
• Firm adhesion of alginate to tray
• Thin film
• Does not interfere with alginate
• Easy to use

• Physical: state Liquid.
• Specific Physical Form: Viscous.
• Boiling point/Initial boiling point/Boiling range: 76.1 ºC
• Flash point: 3.9 ºC [Test Method: Closed Cup]
• Flammable Limits(LEL): 1.2 %
• Flammable Limits(UEL): 11.5 %
• Vapour pressure:17,465.2 Pa

• 1 x 17ml bottle

STEP 1: Select and/or prepare a suitable tray. Prior to the application of Tray Adhesive, a trial fit tray for proper fit and extension.

STEP 2: After the proper fit is assured, rinse and thoroughly dry the tray.

STEP 3: Brush a thin layer of Tray Adhesive onto the tray surfaces that will be covered with impression material and allow to air dry for at least five minutes, but no more than 30 minutes. Repeat application if greater than 30 minutes have elapsed.

Technique Tip: Avoid the placement of excess adhesive onto tray surfaces. Retention will NOT be enhanced and may be compromised by the placement of a thicker layer of tray adhesive onto tray surfaces.

STEP 4: Mix and place desired tray viscosity impression material directly into coated impression tray as per the selected impression material directions.

• Country Of Origin: Germany
• Manufacturer: 3M