3m Espe Relyx U200 Self-Adhesive Resin Cement

• Comfortable and easy delivery in automix syringe
• Comfortable handling
• Optimal consistency for dispensing and seating
• Flexible dosing
• Time-saving
• A great choice of tips allows always easy application of paste directly into the cavity
• Low risk of air bubbles and voids
• Simple and time-saving one-step solution.
• Only a few working steps required
• No pre-treatment such as etching, priming or bonding necessary
• High-performing self-adhesive resin cement.
• RelyX™ U200 Cement is strong where it counts and offers high adhesion, resistance to discolouration, long-term stability and almost no post-operative sensitivities.
• Its exceptionally simple handling, dispensing, treatment and overall working conditions makes this cement a favourite for dentists who are counting on uncompromising quality.

TECHNICAL INFORMATION :

• RelyX™ U200 Cement is strong where it counts and combines the key factors for clinical success:

High colour stability for natural aesthetics.

• Patients will enjoy the high colour stability of RelyX™ U200 cement. Compared to other leading products, it clearly shows the least amount of discolouration after 3 days in a coffee solution.

Proven long-term stability – due to unique material characteristics.

• RelyX™ U200 is acidic and hydrophilic upon application and becomes neutral and hydrophobic after setting. Therefore, it is better able to resist water uptake and remains more stable over time. The results of thermocycling stress tests on self-adhesive resin cements show that RelyX™ U200 cement remains intact, while others show obvious cracking.

Excellent bond strength.

• You can rely on the performance of RelyX™ U200 more than ever: compared to other self-adhesive resin cements, RelyX™ U200 shows the best adhesion – on both dentine and enamel. Patients will benefit from a long-lasting and secure restoration.

COMPOSITION

BASE PASTE:

• Methacrylate monomers containing phosphoric acid groups
• Methacrylate Monomers
• Silanated Fillers
• Initiator Components
• Stabilizers
• Rheological Additives

CATALYST PASTE:

• Methacrylate Monomers
• Alkaline (basic) Fillers
• Silanated Fillers
• Initiator Components
• Stabilizers
• Rheological Additives
• Pigments

Mixing time - 20 sec

Setting time - 6 min/ light cure each surface of the tooth for 20 sec

3m Espe Relyx U200 Self-Adhesive Resin Cement - Translucent (Clicker Dispenser)

• 1 x 11g Clicker Dispenser (Translucent)

3M RelyX U200 Automix Self-Adhesive Resin Cement

• 1 x 8.5g Automix Base/ Catalyst (Translucent)
• 10 x Automix (Regular)
• 5 x Automix (Wide)
• 5 x  Endo Tips

Preparation: Ensure the tooth surface and the restoration are clean and free of contaminants. Verify that the restoration fits accurately before cementation.

Dispensing:

• Clicker™ Dispenser: Attach the appropriate mixing tip to the Clicker™ Dispenser. Dispense equal amounts of the base and catalyst pastes onto a mixing pad. Mix the pastes thoroughly using a spatula until a uniform color is achieved.
• Automix Syringe: Attach the mixing tip to the automix syringe. Gently extrude a small amount of cement until both the base and catalyst pastes emerge simultaneously. Ensure the mixing tip is properly attached.

Application:

• Apply the mixed cement directly onto the interior surface of the restoration. Avoid trapping air bubbles during application.
• Seat the restoration onto the prepared tooth, applying gentle pressure to ensure proper fit.
• Remove any excess cement from the margins and restoration surfaces using suitable instruments.

Light Curing (Optional):

• RelyX™ U200 can be light-cured to accelerate the setting process. Use a curing light according to the manufacturer's instructions. Ensure proper light coverage to cure the cement thoroughly.

Post-Operative Instructions:

• Advise the patient to avoid biting on hard substances for a specific time period, as recommended by the dentist.
• Provide appropriate oral care instructions to the patient.

• Country Of Origin: Germany
• Manufacturer: 3M Deutschland